KG 508 Front Panel

The KG 508 Front Panel is a product of accurate design and engineering, aimed at the reduction of the drag. It utilizes a venturi conduit that accelerates and deviates part of the air flow from the driver. This design allows for a further reduction of 2% of the overall drag.

• Available in Black or Pearl
• Mounting Hardware sold Separately
• Dimensions: Height 770mm (30.31″) Width 299mm (11.77″)

In addition to the CFD simulation KG has been testing at the track utilizing a system of “pitot tubes”, positioned and monitored properly, and such testing validated the brilliance of the design. Pitot tubes do measure air pressure, and by doing so, do establish speed. The differential between pressure/speed between entrance and exit point, gave great results, with a conduit that is really able to “blow” and so accelerate the exit flow toward the driver, thus deviating and reducing the pressure that the driver generate.

At a speed of 125 km/h the differential of speed between the entrance and exit flow it is an amazing 7 meter/second, more than 25 km/h. At higher speed the differential increase further, but even at lower speed like 50 km/h (tight corner) the conduit work very well, with an acceleration of 2 meter/second.

Below  are images of the pitot tubes used during KG’s test sessions. It is noticeable the flow viz, used also in Formula 1 during development, to measure and improve the flow directions.